Event Details: Allow scale configuration
We are using EventFrames to catch Alarm states. Therefore we compare measurements to Limits we created in AF. Unfortunately in the PI Coresight EventFrames Display the trend always configures its y-axis automatically. So all the Limits are on the same line and you can not easily see which Limit raised the alarm or how the measurement value changed between the limits during the EventFrame. It would be nice if the y-axis would be scalable manually (single scale, multi-scale, etc).
This setting would be extremely useful. End users are unable to visualize the data in the method they would want to which prevents this program from being a standalone solution for truly visualizing PI Point data. Please try to enable y-axis configuration.
It would be fantastic if we could arbitrarily change engineering units of displayed values on PI Vision pages.
EF Table PI Vision : If I click on any row in PI Vision EF table it shows event frame details but trend scale is set based on "Range Plotted Values" and multiple scales rather than single scale or db settings which makes it difficult to compare process value against threshold.
Please add Y axis configuration to event frame.
We encounter a problem with the Event Frame due to limitations not to change the Y-axis. This is a hugh problem when batches has a glitch in data and spikes up. Thus, adding in a opportunity to scale the Y-axis, just like regular graphs, would be much appriciated.
WHY THE HELL can I not manually set the y axis scale in the event frame view? I get one glitch high value and the scale resizes so I cant see anything useful at all.
Sasha Krivonosova commented
When using event frame detail view, following features are also needed:
- Adjust the time span
- Use sliders to determine values
- Format trend (especially scale)
- Zoom into trend